How to Use The ClampTite Tool

How To Use The ClampTite Tool


Single Wrap Instructions

The three illustrations shown are for a more simplified single strand wrap for a fast and easy fix. This method will allow for as many wraps as desired. Lube threads before using.

Clamptite tool Step 1 single wrap instructions
  • Insert end of wire into front pin on the left hand side
  • Bring wire over the nose and in front of forward pin on the right hand side
  • Wrap wire around hose (as many wraps as desired
  • Bring wire over the top of the wraps and around the rear pin on the right hand side
  • Take wire over the top of the tool and around the pin on the left hand side
Clamptite tool Step 1 alternate method  single wrap instructions
  • Place loop of wire around nose and twist to tighten
  • Wrap wire around hose (as many wraps as desired)
  • Bring wire over the top of the wraps and around the rear pin on the right hand side
  • Take wire over the top of the tool and around the pin on the left hand side
Clamptite tool Step 2 single wrap instructions
  • Turn wing nut to tighten
  • When clamp has reached desired tension, rotate tool 180 degrees to lock clamp
  • Loosen wing nut and remove clamptite tool
  • Clip wire ends about 1/4 inch from clam and push down towards hose

 


Double Wrap Instructions

The four illustrations shown are for a double strand wrap for a very secure item. Lube threads before using.

Clamptite tool instructions double step 1
  • Cut wire to length (4 times around project plus 12" for tool)
  • Fold wire in half, tape or wire nut ends together
  • Wrap around hose where you want a clamp
  • Tuck ends through the loop
Clamptite tool instructions double step 2
  • Continue to wrap around in the same direction (inside the first wrap)
  • Tuck thru loop again and remove tape or wire nut
  • Place tool as shown with wire over front pin and around rear pin
  • Twist ends together tightly about 6 twists as close to the body of the tool as possible
Clamptite tool instructions double step 3
  • Place notch at end of tool against the wire loop
  • Turn wing nut clockwise to tighten (right hand threads)
Clamptite tool instructions double step 4
  • Rotate tool over to lock the clamp bending wires back over themselves
  • Loosen wing nut and remove the clamptite tool
  • Clip off wire ends about 1/4 inch from clamp and push ends down against the hose

Would you like to see this in action?

Watch the following video which demonstrates both methods that are listed above.



4 3/4" Stainless Steel Tool w/Bronze Nut Extends to 7" Long

4 3/4" Stainless Steel Tool w/Bronze Nut Extends to 7" Long

CLT01 --This tool is machined stainless steel with a one piece body and nose and bronze nut. The..

$69.95

ClampTiteTool Kit - CLT03K

ClampTiteTool Kit - CLT03K

CLT03K --    This kit contains:    Zippered Case  1 Stainless Steel/Al..

$99.95

ClampTiteTool Kit - CLT07K & CLT09

ClampTiteTool Kit - CLT07K & CLT09

CLT09K --     This is a Combo Special!   This kit contains: ..

$359.95

ClampTiteTool Kit - CLT7LK & CLT09

ClampTiteTool Kit - CLT7LK & CLT09

CLT9LK --  This is a Combo Special! This kit contains:  Zippered Case1 Stainless Steel Too..

$369.95

4 3/4" Plated Steel and Aluminium Tool  Extends to 7" Long

4 3/4" Plated Steel and Aluminium Tool Extends to 7" Long

CLT05 -- Plated steel components with aluminum body. This tool was designed with the mechanic in min..

$29.95

10 5/8" Stainless Steel/Alum. with Hex Nut Extends to 17" Long

10 5/8" Stainless Steel/Alum. with Hex Nut Extends to 17" Long

CLT09 --Exceptionally strong banding tool which is used for securing or attaching large objects. Han..

$129.95

1 lb Can Stainless Steel Wire  (304 .041)

1 lb Can Stainless Steel Wire (304 .041)

CLTW24 -- Because your wire becomes your clamp, we recommend stainless steel wire because of its str..

$24.95

1 lb Can Stainless Steel Wire (304 .051)

1 lb Can Stainless Steel Wire (304 .051)

CLTW28 -- Because your wire becomes your clamp, we recommend stainless steel wire because of its str..

$24.95

Showing 1 to 8 of 8 (1 Pages)